峨山褐煤的分子结构和分子模拟

作为重要的化石能源，褐煤资源潜力巨大、分布广泛但综合利用率低。研究褐煤的分子结构模型，有助于预测褐煤在热解、液化和气化过程中的化学反应机理及反应路径，进而提高褐煤的综合应用水平。以云南峨山褐煤为研究对象，利用傅里叶变换红外光谱、13C核磁共振波谱及X射线光电子能谱等分析测试方法，获取了峨山褐煤的含碳、含氧及含氮结构参数。在此基础上，借助Gaussian 09计算平台，采用量子化学建模的方法构建并优化了峨山褐煤的分子结构模型。研究结果表明：峨山褐煤的芳碳率为39.20%，芳香碳结构主要为苯和萘，且芳香桥头碳与周边碳的比值χ_b为0.07；脂碳率为49.51%，脂肪碳结构主要为亚甲基，季碳和氧接脂碳；氧原子主要存在于羟基、醚氧、羰基和羧基结构中；含氮结构则以吡啶为主。基于元素分析、13C 核磁共振波谱分析，又经过热重实验消除褐煤中残余水分的影响后，计算出峨山褐煤的分子式为C₁₅₃H₁₃₇O₃₅N₂。依据分子式及分析结果计算出峨山褐煤的结构单元含量并构建出其初始结构模型，采用半经验法PM 3基组及密度泛函理论M06-2X/3-21G基组对初始分子构型进行优化。优化后的分子模型具有明显的三维立体特征，芳香环之间较为分散且在空间中排列不规则，芳香簇主要通过亚甲基、醚氧基、羰基、酯基和脂肪环连接，含氧官能团主要分布在分子边缘，脂肪族侧链较多。对优化后的分子模型进行振动频率计算进而获得了分子模型的模拟红外光谱，其与实验红外谱图吻合度良好，证明了峨山褐煤分子结构模型的准确性、合理性。分子结构模型的构建有利于直观地了解峨山褐煤的分子结构特征，从而有助于从微观分子角度研究峨山褐煤的宏观性质。同时，峨山褐煤分子结构模型可为其在热解、液化和气化等领域研究中提供理论指导。     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

Aromatic and Antiaromatic Pathways in Triphyrin(2.1.1) Annelated with Benzo[b]heterocycles

Understanding of the aromatic properties and magnetically induced current densities of highly conjugated chromophores is important when designing molecules with strongly delocalized electronic structure. Linear extension of the triphyrin(2.1.1) skeleton with an annelated benzo[b]heterocycle fragment modifies the aromatic character by extending the electron delocalization pathway. Two-electron reduction leads to an antiaromatic triphyrin(2.1.1) ring and an aromatic benzo[b]heterocycle subunit. Current-density calculations provide detailed information about the observed pathways and their strengths.     

耐等离子刻蚀陶瓷的研究现状

等离子刻蚀技术是超大规模集成电路制备工艺中不可或缺加工技术.在半导体晶圆尺寸不断增大以及特征尺寸不断缩少的发展进程中,晶圆的污染问题越来越突出.而刻蚀机腔室材料作为晶圆的主要污染源之一,其耐等离子刻蚀性日益受到人们的关注.本文主要介绍耐等离子体刻蚀腔体材料的特性及目前国内外的研究与发展现状.     

秋千参数自激振动的数学模型与数值模拟

将秋千视为变长度单摆,基于归一化高斯函数构造了摆球相对摆杆的速度表达式.在此基础上建立了秋千的非线性动力学微分方程,并据此数学模型对秋千运动进行了数值模拟,得到了秋千的运动规律和功能转化的机制.     

Sturmian Ground States in Classical Lattice–Gas Models

Journal of Statistical Physics - We construct for the first time examples of non-frustrated, two-body, infinite-range, one-dimensional classical lattice–gas models without periodic...     

A New Method of Testing and Evaluating the Quality of Refined Montan Wax: Digital Color and GC Fingerprint

To establish a new method of testing and evaluating the quality of refined montan wax (RMW), digital color and GC fingerprint technology were introduced and applied. CIE Lab color mode was used to digitize the exterior colors of RMW, and the score obtained through a fitting function was also used to reflect its quality. It is shown that they were in complete accord with the human visual perception trend. The GC fingerprint was used to characterize the internal chemical information of RMW, and the composition of its internal features was reflected through the relative retention time (RRT) and relative peak area (RPA) values. It is shown that there was a high degree of similarity between the fingerprints, while certain differences also existed. This can be used to implement effective application of RMW to aspects such as quality control, adulteration identification, and origin attributions.

     

Vitamin K1 distribution following intravenous vitamin K1–fat emulsion administration in rats

This study investigated vitamin K₁ (VK₁) distribution following intravenous vitamin K₁–fat emulsion (VK₁–FE) administration and compared it with that after VK₁ injection. Rats were intravenously injected with VK₁–FE or VK₁. The organ and tissue VK₁ concentrations were determined using high‐performance liquid chromatography method at 0.5, 2 and 4 h to determine distribution, equilibrium and elimination phases, respectively. In the VK₁–FE group, the plasma, heart and spleen VK₁ concentrations decreased over time. However, other organs like liver, lung, kidney, muscle and testis, reached peak VK₁ concentrations at 2 h. In the VK₁ injection group, the liver VK₁ concentrations were significantly higher than those in other organs at the three time points. However, VK₁ concentrations in the other organs peaked at 2 h. In addition, in VK₁–FE group, the heart, spleen and lung VK₁ concentrations were significantly higher than those in the VK₁ injection group at the three time points, and the liver VK₁ concentration was significantly higher than that in the VK₁ injection group at 4 h. The VK₁ amount was greatest in the liver compared with the other organs. Thus, the liver is the primary organ for VK₁ distribution. The distribution of VK₁ is more rapid when injected as VK₁–FE than as VK₁. Copyright © 2015 John Wiley & Sons, Ltd.